Please refer to the video (https://youtu.be/dtI8igIIn0Q).

1.Open the Hi-GNSS software,double click "GPS-Off Line" to connect to the GPS.
2.Set rover parameters(Mark "Send Rover Position to Network").
3.Click "POS",and click arrow to do the NMEA setting.
4.Set the parameters(Interval).

1.Set V30 as rover and get corrections from base and get fixed solution, then go to the "Log row GPS" interface.
2.Creat a new static data file and set the corresponding parameters and confirm it.
3.Go to store points in RTK mode.

1.Set up base,collect static data.
2.Start up another receiver, waiting until tracked satellite, then do stop-go.
3.Collect static data through receiver panel or software.

Please refer to the bellow file.

1.Apply the result in the interface of "Adjust".
2.Checkdatum in theProject Setting directory.
3.Save and apply while you creating a new project.

1.Connect the GNSS Receiver in Hi-RTK software. Then click "Information"to find the "Base&Static".
2.Get into that interface, set the sampling interval, antenna height and file name.
3.Then click "Start" to collect the static data.

Please refer to the bellow file

1.Calibrate electronic bubble. (Connect V90 Plus in Hi-Survey Road software,then find Electronic bubble calibration in "Others" to do the calibrate).
2.Calibrate direction sensor.
3.Calibrate attitude deviation.
3.Do survey.(Auto collecting by "bubble is center").

Please refer to the bellow file.

1.Check the Antenna measurement explanation.
2.In "Set rover antenna" interface, chose the right antenna take position.

1.Set rover via Hi-RTK software,change Sky BuateRate（Linkrate）to 9600.
2.Change external radio Sky BauteRate.(Please refer to the bellow file).