1.Run the Hi-RTK and open a project.
2.Go to the Setting interface.
3.Set the parameters according to your own coordinate system and save it.
4.Find it in GeoPath.

1.Double click "My device", then open "Windows" folder.
2.Double click to start this software :ModulePowerCtrl.
3.Click "WIFI" button to turn it on.
4.Go back to desktop, click Cross to set WIFI.

Please refer to"attach file"as below

1.Device bluetooth connecting.
2.Software connecting.

1.Set paramaters with total station.
2.Device connect with total station.
3.Do survey work and collect the point on the device.
More detailed operation refer to relevant file.

1.Set paramaters with total station.
2.Device connect with total station.
3.Do survey work and collect the point on the device.
More detailed operation refer to relevant file.

1.Open the properties of serial port.
2.Turn into port setting and enter into [advanced].
3.Change the serial port.

there are several procedures to do in summary.
1.take a picture of the current condition of the instrument in case of forgetting the position of each part.
2.Take out the cover and then see laser plummet.
3.Replace the laser plummet.
4.Fix the screws with glue to fasten them.Then assemble the instruments together.detailed operation procedures please refer to relevant file.

1.Setting on the total station.
2.Using the Hyper Terminal and connect total station, if there is no this software please download from the internet.
3.Setting parameters.
4.Following the prompts to upgrade.

1.Open the"PC-IO Data software" ->".MEA file"
2.Output the" .MEA file"
3.Choose the out put coordinate format (Must remember the format you choose).
4.Save as the format you want (.CSV or .TXT maybe better).
5.Input the file (.CSV format) that has been saved above; Choose “Coordinate File”->Input.
6.Click “Input” when you can edit the data, but just can edit the coordinates noangle!

1.Open Total Station data transfer software. 2.Choose Coo file in the red frame, then click"import"to import the Coo file you just exported. 3.Choose the"*.DXF", and then click"output".

1.Copy the shortcut icon of Hi-Q:Long press the "Hi-Q"->click "Copy".As figure 1 shows.
2.Click the place as figure 2 shows.Choose:My Device->Windows->Start Menu.